Akzo Nobel Limited Paint Warranty

WARRANTY APPLIES TO WOOD GRAIN FINISHES PURCHASED FROM 2004 - JUNE 30, 2018

POLYDURE® 510 PRINT SYSTEM LIMITED WARRANTY

AKZO NOBEL COATINGS INC. ("AKZO NOBEL") extends the following limited paint warranty to JANUS INTERNATIONAL on its POLYDURE® 510 PRINT SYSTEM for use in coating coils of metal which will be fabricated by JANUS INTERNATIONAL into commercial, industrial and residential metal garage doors sold under the JANUS INTERNATIONAL brands and installed in the United States and Canada. This limited warranty applies only to vertical surfaces as installed. This is not a corrosion warranty.

SECTION A: LIMITED WARRANTY

AKZO NOBEL warrants that POLYDURE® 510 PRINT SYSTEM will conform to the performance standards listed below (the "Limited Warranty"):

1. Within 10 years from the date of installation POLYDURE® 510 PRINT SYSTEM will not peel, flake or otherwise lose adhesion to an extent that is apparent on ordinary outdoor visual observation. NOTE: Slight crazing or cracking may occur on formed edges or break bends at the time of forming, and is considered standard-such crazing or cracking shall not constitute a basis for complaint under this Limited Warranty. Further, failure due to substrate issues including, but not limited to corrosion is not covered by this Limited Warranty. Various metals may react differently under different atmospheric conditions.

2. Within 5 years from the date of installation:

a) the print coat on vertical panels of POLYDURE® 510 PRINT SYSTEM will still be visually discernible from a distance of eight (8) feet under visual observation in exterior daylight conditions; and

b) vertical panels of POLYDURE® 510 PRINT SYSTEM will not exhibit excessive color change, except that any such color change shall be visually uniform under conditions of uniform exposure; and

c) vertical panels of POL YOU RE® 510 PRINT SYSTEM will not chalk more than a number six (6) rating when measured per ASTMD 4214, Method A.