HomeHomeContact UsContact UsRequest InformationRequest InformationSite MapSite Map

Commercial Products

Model 1950 HD
Heavy Duty Commercial Sheet Door

Model 1950 HD

General Description

  • Applications suitable for frequent usage
  • Utilizes 9 ½” drum wheel
  • Maximum opening size of 12’ wide x 14’ high (168 sq.ft.)
  • Push-up, hand chain and electric operations

Curtain

  • 26-gauge galvanized corrugated steel
  • Grade 80 galvanized steel
  • 20 standard colors (special colors upon request for a nominal upcharge)
  • Super Durable polyester paint coatings, which are corrosion resistant
  • Wash coat over primer interior side 
  • 40-year film integrity warranty — up to 25-year chalk and fade
  • Flexible nylon wear strips

Bottom Bar

  • 24 gauge acrylic-coated galvalumed roll formed steel
  • 2” x 1 ½” galvanized angle 
  • Bulb astragal (Durometer 75) 
  • Stainless steel nuts and bolts

Axle/Torque Tube

  • 1-5/16” O.D. steel axle, 14-gauge
  • Oil tempered torsion springs conforming to ASTM A229
  • 16-gauge, 9 ½” diameter galvanized drum
  • Low friction, grease-filled steel ball bearings staked in each drum
  • 26 gauge spiral torque tubing that houses axle assembly

Guides

  • 12 gauge galvanized 
  • Bolt on head stop ¼” thick steel 
  • 2-7/8” guide depth
  • Pre-punched for lock and attachment bolts
  • Universal jamb mount

Hardware

  • Bottom bar mounted 10 gauge slide locks - 2 per door
  • Bottom bar mounted 16 gauge step plate - 2 per door 
  • 16 gauge door mounting bracket
  • 1” tension holding device

Options

  • Insulation Series 1950 I (R-value 4)
  • Top draft stop
  • Side draft stop
  • Header seal
  • Chain hoist 4:1 reduction
  • Electric operator
  • Vision panels (17”x 5”)
  • Hood
  • Steel mounting plates
  • Stainless steel mini latch

Documents